Hercures-Steam-Tagboat(SAITO.Co JAPAN)--3
The brush coating of the clear lacquer paint is carried out. It polishes with a sandpaper.(#320~400) 3 times repetition Don't polish until wooden cloth comes out. A dent is putty-corrected.
Furthermore, surfacer splay paint Putty correction It is by the sandpaper (#400) grinding lightly. White color splay is blown. In order that 2F deck may stretch a board So,paint is carried out .
Until the unevenness of white is lost Time is set and it is about 3 - 6 times. It blows. It blows too much and does not hang down. It is light! From it .Teak material is stretched.
Winding-up equipment of an anchor Material is a plasticModel's gear. The gear of RC car The case of an ink cartridge
The root of a mast Pipe machining of aluminum Since circle windows of a kit is insufficient an eyelet-metal fitting parts is substituted!
haust port of a deck portion and Machining of a rib
Time to move a hand in fact and The time which considers a process and procedure is about [ same ]. Epoxy adhesives are used fundamentally [ all ]. Short-time or long time hardening It uses properly by working hours. It is a moment auxiliary. (Cyanoacrylate Adhesive) Metal is the condition of the shape of gel in the degree of low (a coefficient of viscosity), metal, and a wood. For sticking to a chimney (metal) and the deck, it is the shape of gel.(Cyanoacrylate Adhesive) After connecting combination of thread, it is the degree of low (a coefficient of viscosity). When a crevice grows for a while also as for a tree, it is called the shape of gel.
It continues to the next (paint and fitting).
Top-page->