KYOSHO.Co. StreamLiner scale-up(4)
The window was an one sheet thing at the original one. 。 A fold is attached right in the middle and it is shown as V type two sheet wind. Reflector glass is to cut 1mm aluminum, and, seemingly it is it.. The aluminum line tape of 1mm width is stuck on the window bottom.
The sticker was troubled(damaged). It comes off considerably. There is a sheets [ several ] thing without a prototype. In a personal computer It will make himself. The original sticker, It removes as finely as possible and scans.
It traces by adobe illustrator. The heat transfer printer of ALPS is used. Metallic silver ink is printed on a transparent sheet (got and attached). Furthermore, a transparent sheet (got and attached) is stuck upwards once again. Place changed into the transparent sheet which is not the thing which transparency becomes a cloudy, result bad. So, I tryed other one (an object for Not use printers). It succeeded. It is structure about metallic silver and a white sticker. It sticks on a proper place.
It is the wood bought at the shop. (not pre-wood) There is moderate grain so that it may be not a hinoki but timber from Southeast Asia. It is coloring by oil-stain-paint.
Meter is also made. Silver is usage about the cutting machine for XY-ploter. Metallic silver is clipped. As shown in the right figure, four cubic effect was taken out in piles. All four sheets are the sheets with paste		Silver Metalic White clear printed
RealBoat!		The metallic feeling has come out by the solid
It's Model!		The handle is processing and painting kit original accessories.
The base of a sofa uses the original thing. Since it is somewhat small, additional adhesion of the urethane foam is carried out, and the form is prepared
Work of a flag It is making by adobe illustrator. It prints on the cloth for ink jet printers. (It is the cloth which goes up and is transparent on the reverse side called japanese-[ponji] by the object for banner) probably -- It is not sold at retail. The thin cloth made from nylon is stuck on paper with spray paste. The pattern of a flag is printed by the printer to it. Paper is removed later. Spray paste is lightly used for decoloring prevention.
Touch which slackened .... Is it good? The head of a flagstaff The aluminum which was around there. A flagstaff is Bamboo Skewer
It continues to the next 05.
Top-page->