| Hercures-Steam-Tagboat(SAITO.Co JAPAN)--1 | |||
 |
|||
| Even if it makes a kit as it is Since it is not interesting, the design
has been changed. Since it is the same, please adopt the fundamental way of making to reference. |
|||
| Outside marginal tension Heat is applied with a drier and a form is prepared. Finally it stretches with adhesives. |  |
||
| Inside marginal tension |
 |
||
| A deck is a cloth gummed tape about Hull It presses down, coming out and narrowing. |
 |
||
| It is from a ship's bottom first.
A kit is FRP with white gel coat finish. Although colored then Since it is not pleased It drops colors by a sandpaper. A wave is corrected. |
 |
||
| It comes out and is ground structure I will grinding by water&sandpaper , can be performed in 10 minutes after spraying. |
 |
||
| Epoxy resin It said-frame-fixes with a fiber. Since lib-plate is attached As assistance Roving of glass fiber is used. If glass fiber (roving) is nothing. then What loosened glass-cloth and made thread the bunch is used |
 |
||
| A crack is putty-corrected.
Putty uses the thing of 2 liquid mixture. If it is little and is good, it is to the counter of autoparts. |
 |
||
| The thing also with a somewhat gorgeous
stock was made. It is after coloring at oil stain. It has finished by coating three times at wax for floors. This wax for floors is resin made from 1 liquid. If it gets dry so that it may be water of milk white It is finished in the touch with sufficient half-gloss. |
 |
||
| Paint The 1st time Can spray In a home center |
 |
||
| It sets for 10 minutes and is the 2nd time.
furthermore -- once again |
 |
||
| The 4th time It OKs mostly! Gloss also came out. |
 |
||
| Under masking |  |
||
| The portion of a handrail is with the brush.
The grain pattern was drawn. Rude one a can spray serface Since it is not pleased It has polished by finish sand party. Exactly good atmosphere! |
 |
||
|
|||
Top-page-> |
|||